Description
The IK Multimedia iRig PRO I/O Audio & MIDI Interface for iPhone, iPad, Mac, PC & Android is made by IK Multimedia. If you are looking for a great & PC Mac, iPad, iPhone, Interface for MIDI & Audio I/O PRO iRig . The IK Multimedia iRig PRO I/O Audio & MIDI Interface for iPhone, iPad, Mac, PC & Android is in stock and available from Synth for Sale now for £108 with delivery to all areas of the UK/Europe & USA. .
This pocket sized audio/MIDI interface is a great addition to your kit bag when it comes to recording on the go. Simply put the iRig Pro lets you use your studio mics out and about without the need for loads of kit, or bulky interfaces.
Pro-level features
Packed in to this tiny box are several really handy pro features like Phantom Power, 24bit/96KHz recording quality and an on board digital audio convertor. Plug in your studio condenser mics or your guitar and off you go, simple, easy to use and designed to be plug and play.
Compatible
Compatibility is off the charts with support for Windows, Mac, iOS and Android, so you really can use this thing on the go.
Power
The iRig will even run off of two AA batteries (even with Phantom power on), and when running off the 5.4v power supply it will charge your iPhone or iPad at the same time – nice! If you’re using it with a laptop or PC, it will draw it’s power from the USB port, so you don’t have to carry around extra cables and adapters.
Good Old Fashioned Headphone Jack
With Apple relegating the Headphone Jack to the archives of I/O history, IK Multimedia have added a headphone output with dedicated volume control so you can easily monitor yourself.
MIDI
MIDI I/O gives you decent flexibility – you can hook up your keyboards and MIDI controllers with two standard 5-pin MIDI to 2.5mm cables in the box.
Software
Included in the bundle is AmpliTube for iOS, AmpliTube 4 for PC/Mac, SampleTank 3 SE, T-Racks Deluxe with Mic Room and more.
Specs
Microphone Input
- Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: 1.6 kOhms
- Gain Range: 40 dB
- Phantom Power: +48V ± 4V
- Frequency Response: 20 Hz – 20 kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Instrument Input
- Instrument Input: unbalanced, Hi-Z, TS 1/4″ Jack, Tip: signal / Shield: ground
- Instrument Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 1 MOhms
- Gain Range: 27 dB
- Frequency Response: 20 Hz – 20 kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
- Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
- Headphone Level Control numbered thumbwheel
- Headphone Level Power 100mW into 50 Ohms
MIDI Input/Output
- Connector: 2×2.5mm TS Jack
Other Input/Output
- DC barrel: 1x DC barrel. For power and device charging.
- Device Connector: mini-DIN
Common
